Cisco Cisco TelePresence MX700 Riferimenti tecnici
D15335.04
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.2, JUNE 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
103
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Video Selfview Default FullscreenMode
Define if the main video source (self-view) shall be shown in full screen or as a small picture-
in-picture (PiP) after a call. The setting only takes effect when self-view is switched on (see the
Video Selfview Default Mode setting).
Requires user role: ADMIN
Default value: Current
Default value: Current
USAGE:
xConfiguration Video Selfview Default FullscreenMode:
FullscreenMode
where
FullscreenMode
: Off/Current/On
Off: self-view will be shown as a PiP.
Current: The size of the self-view picture will be kept unchanged when leaving a call, i.e.
Current: The size of the self-view picture will be kept unchanged when leaving a call, i.e.
if it was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the
call, it remains fullscreen after the call.
On: The self-view picture will be shown in fullscreen.
On: The self-view picture will be shown in fullscreen.
xConfiguration Video Selfview Default OnMonitorRole
Define which monitor/output to display the main video source (self-view) on after a call. The
value reflects the monitor roles set for the different outputs in the Video Output Connector [n]
MonitorRole setting.
The setting applies both when self-view is displayed in full screen, and when it is displayed as
picture-in-picture (PiP), but only if the Video Monitors setting is set to Dual or Triple.
Requires user role: ADMIN
Default value: Current
Default value: Current
USAGE:
xConfiguration Video Selfview Default OnMonitorRole:
OnMonitorRole
where
OnMonitorRole
: First/Second/Third/Current
First: The self-view picture will be shown on outputs with the Video Output Connector
[n] MonitorRole set to First.
Second: The self-view picture will be shown on outputs with the Video Output
Connector [n] MonitorRole set to Second.
Third: The self-view picture will be shown on outputs with the Video Output Connector
[n] MonitorRole set to Third.
Current: When leaving a call, the self-view picture will be kept on the same output as it
was during the call.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration