Cisco Cisco Unified MeetingPlace Audio Server Guida Alla Risoluzione Dei Problemi

There is nothing that needs to be done. However, if a system is configured to have a certain Audiocodes board
perform VoIP operations and this message is not received, there is either a system configuration problem or
the Ethernet is down. In this case, contact Cisco Technical Support for how to resolve this issue.

There is an Audiocodes board present in the system (and powered up) that is not used for anything.

There is nothing to do if the board is supposed to be installed but not otherwise used. However, if the system
is configured to use this board, check the blade command for a misconfiguration.

A user has downed an MSC device so that it no longer supports conferencing.

This is generally done on purpose by a technician in preparation for a hotswap replacement of the SmartBlade
that contains the MSC. This is perfectly normal if it is done intentionally by the technician. Otherwise, this
can indicate that the MSC is downed by mistake. In this case the technician needs to bring the MSC back up.

A user has downed a PRC device so that it no longer supports individual phone calls.

This is generally done on purpose by a technician in preparation for a hotswap replacement of the SmartBlade
that contains the PRC. This is perfectly normal if it is done intentionally by the technician. Otherwise, this can
indicate that the PRC is downed by mistake. In this case the technician needs to bring the PRC back up.

The Lynx file system has enough free space for normal MeetingPlace operation.

There is nothing that needs to be done.