Cisco Cisco Unified MeetingPlace Video Integration Guida All'Installazione
11
5
Installing the Video Integration Component
Before You Begin
•
Make sure you have completed all previous tasks in this document.
•
Make sure that the Cisco Unified MeetingPlace system is not in use. The Video Integration installer will stop the web
conferencing master service and all subordinate services.
conferencing master service and all subordinate services.
•
Verify that the Video Administration server and the Cisco Unified Videoconferencing MCUs are available on the network
(reachable via their IP addresses).
(reachable via their IP addresses).
•
Note the E.164 number that is used to direct calls to the Cisco Unified MeetingPlace H.323/SIP IP Gateway. To locate that
number:
number:
On the machine on which the Cisco Unified MeetingPlace H.323/SIP IP Gateway is installed, choose Start > Programs >
MeetingPlace Applications > MeetingPlace Management.
MeetingPlace Applications > MeetingPlace Management.
Procedure
Step 1
Run the Setup.exe for Cisco Unified MeetingPlace Video Integration.
After installation is complete, Cisco Unified MeetingPlace services will restart automatically.
Step 2
Repeat
on each web conferencing server. Check the Host Video Conferences check box for only one web
conferencing server.
6
How To Modify the Web Conferencing Server Configuration
•
•
Configuring the Web Conferencing Servers to Synchronize with the Network Time
Protocol Server
Protocol Server
For a Release 5.4 Cisco Unified MeetingPlace system, use this procedure.
For a Release 6.0 system, the web conferencing servers automatically synchronize with the audio server.
Procedure
Step 1
Navigate to the Windows Control Panel.
Step 2
Double-click MeetingPlace Gateways.
Step 3
Click Internet Time.
Step 4
Check Synchronize Server Time with NTP Server.
Step 5
Enter values for all other options in the window.
Step 6
Click OK.
Step 7
Repeat this procedure on each web conferencing server.