Cisco Cisco Unified MeetingPlace 5.3 Manuale Di Manutenzione
3
Hot Swap Controller Replacement Procedure for the Cisco MeetingPlace 8112
OL-6466-01
Before Replacing the Hot Swap Controller
Note
CLI commands are case sensitive. For CLI command information, see the Configuration Guide
for Cisco MeetingPlace Audio Server Release 5.3.
for Cisco MeetingPlace Audio Server Release 5.3.
Step 2
Keep a record of activity during the hot swap controller replacement by capturing the text in the terminal
emulator program. This information can be used by Cisco TAC to diagnose problems that may occur
during this replacement. Follow these steps:
emulator program. This information can be used by Cisco TAC to diagnose problems that may occur
during this replacement. Follow these steps:
a.
Go to the Transfer menu in the HyperTerminal window.
b.
Select Capture Text.
c.
Save the file. Note the location so that you can retrieve the file later.
d.
Click Start.
Step 3
At the CLI prompt, log in as an administrator. The tech$ prompt appears.
Note
For Cisco MeetingPlace Release 5.2, the default administrator username is tech and the default
administrator password is wit!tra$. For Cisco MeetingPlace Release 5.3, the default
administrator username is admin and the default administrator password is cisco. See the
Installation and Upgrade Guide for Cisco MeetingPlace Audio Server Release 5.3 for more
information about logging in to Cisco MeetingPlace.
administrator password is wit!tra$. For Cisco MeetingPlace Release 5.3, the default
administrator username is admin and the default administrator password is cisco. See the
Installation and Upgrade Guide for Cisco MeetingPlace Audio Server Release 5.3 for more
information about logging in to Cisco MeetingPlace.
Step 4
At the tech$ prompt, enter activity. The VUI Internal Status Utility menu appears.
Step 5
To see a quick status of all ports, enter 1. A list of the ports appears. The ports are listed numerically
under the Port heading and the port status is under the Ap heading.
under the Port heading and the port status is under the Ap heading.
headings.
Step 6
Verify that all the ports are inactive by ensuring that all ports have -- under the Ap heading. Press Enter
to go to the next page. When you have scrolled through all the ports, the VUI Internal Status Utility menu
appears.
to go to the next page. When you have scrolled through all the ports, the VUI Internal Status Utility menu
appears.
Table 1
Terminal Emulator Port Parameters
Parameter
Value
Baud
19200
Data length
8 bit
Parity
None
Stop bits
1
Table 2
Ap Headings and Definitions
Heading
Definition
--
The port is inactive.
CO
The port is participating in an active conference.
PR
The port is currently accessing a meeting profile.