Cisco Cisco D9824 Advanced Multi Decryption Receiver Guida All'Installazione
Chapter 1 Quick Setup - Read Me First!
6
78-4039426-01 Rev D
ASI Out
1 Press MENU to move to the MAIN MENU.
2 Press
2 Press
to move to the Setup menu. Press SELECT.
3 Press
to move to the Outputs menu. Press SELECT.
4 Press
to move to the TS Out menu. Press SELECT.
5 Press SELECT to access the ASI menu. Press . Press SELECT. Use
to select
the output mode. The factory default is "No Output". It is recommended to set
the Output Mode to MAP Svc Chans Only. Refer to Factory Default Settings (on
page 282) for Different Output Modes, for information on the default settings in
order to choose the desired Output Mode. Press SELECT. Press
the Output Mode to MAP Svc Chans Only. Refer to Factory Default Settings (on
page 282) for Different Output Modes, for information on the default settings in
order to choose the desired Output Mode. Press SELECT. Press
to select "YES"
if requested to "RESYNC ALL?". Press SELECT. Press
to move to
Descrambling Mode Menu. Press SELECT. Use
to select the scrambling
mode. Press SELECT.
6 Press APPLY. Press SELECT.
7 Press MENU 5 times to return to the startup menu.
7 Press MENU 5 times to return to the startup menu.