Cisco Cisco Web Security Appliance S670 Guida Utente

 describes the WCCP options.

Service Profile Name

Enter a name for the WCCP service.

Service

Use this section to describe the service group for the 
router.

Choose to create either a standard (“well known”) or 
dynamic service group. 

If you create a dynamic service, enter the following 
information:

Service ID. Enter any number from 0 to 255 in the 
Dynamic Service ID field.

Port number(s). Enter up to eight port numbers 
for traffic to redirect in the Port Numbers field.

Redirection basis. Choose to redirect traffic based 
on the source or destination port. Default is 
destination port. 

Load balancing basis. When the network uses 
multiple Web Security appliances, you can choose 
how to distribute packets among the appliances. 
You can distribute packets based on the server or 
client address. When you choose client address, 
packets from a client always get distributed to the 
same appliance. Default is server address.

For more information about well known and dynamic 
service groups, see 

Router IP Addresses

Enter the IP address for one or more WCCP enabled 
routers. You can enter up to 32 routers to the service 
group. You must enter the IP address of each router. 
You cannot enter a multicast address.