Cisco Cisco UCS C210 M2 General-Purpose Rack Server Scheda Tecnica

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)

CONFIGURING the SERVER

■

One mezzanine RAID controller for internal drives and one RAID controller for external
drives

NOTE: For all valid combinations of embedded RAID, mezzanine RAID, and
internal/external RAID controller combinations, see

RAID Details, page 70

Table 7 Available Embedded RAID Options

Product ID (PID)

PID Description

RAID Controllers

UCSC-RAID-ROM1

Onboard RAID, consisting of a plug-in storage controller unit (SCU), supporting

up to 8 internal SAS +SATA drives. SAS and SATA drives can be mixed. This

option supports RAID 0, 1, and 10, and operates at 3 Gb/s. Operating systems

supported are Windows and Linux only (no VMware support).

UCSC-RAID-ROM15

Onboard RAID, consisting of two plug-in modules (an SCU plus a software key

module) supporting up to 8 internal SAS+SATA drives. SAS and SATA drives can

be mixed. This option supports RAID 0, 1, 5, and 10 and operates at 3 Gb/s.

Operating systems supported are Windows and Linux only (no VMware

support).

Table 8 Available Mezzanine Card RAID Options

Product ID (PID)

PID Description

Mezzanine RAID Controllers (not supported in 1-CPU systems)

UCSC-RAID-11-C220

Cisco UCSC RAID SAS 2008M-8i Mezzanine Card (RAID 0, 1, 5, 10, and 50 plus

JBOD supported), operating at 6 Gbs.

■

Supports up to eight internal SAS+SATA drives (limited to four drives for

the C220 M3 LFF chassis). SAS and SATA drives can be mixed.

■

Factory-configured RAID options available: RAID 0, 1, 5, and 10 (see the

RAID PIDs section in this table)

■

No data cache backup

NOTE: VMware ESX/ESXi or any other virtualized environments are not supported
for use with the embedded MegaRAID controller. Hypervisors such as Hyper-V, Xen, or
KVM are also not supported for use with the embedded MegaRAID controller