Cisco Cisco UCS C210 M2 General-Purpose Rack Server Scheda Tecnica

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)

CONFIGURING the SERVER

UCSC-RAID-MZ-220

Cisco UCSC RAID SAS 2008M-8i Mezzanine Card (RAID 0, 1, 10 plus JBOD

supported), operating at 6 Gbs.

■

Supports up to eight internal SAS+SATA drives (limited to four drives for

the C220 M3 LFF chassis). SAS and SATA drives can be mixed.

■

Factory-configured RAID options available: RAID 0, 1, and 10 (see the RAID

PIDs section in this table)

■

No data cache backup

Table 9 Available PCIe RAID Controller Options

Product ID (PID)

PID Description

RAID Controllers

Note that PCIe RAID controllers are installed by default in slot 1 for 1-CPU systems and slot 2 for

2-CPU systems)

UCS-RAID9271-8I or
UCS-RAID9271CV-8I

LSI MegaRAID SAS 9271-8i or 9271CV-8i RAID controller card with data cache

backup (RAID 0, 1, 10, 5, 6, 50, 60), operating at 6 Gbs.

■

Supports up to eight internal SAS+SATA drives (limited to four drives for

the C220 M3 LFF chassis). SAS and SATA drives can be mixed.

■

Includes a 1 GB Transportable Flash Module (TFM) and a chassis-mounted

(remote) supercapacitor for data cache power backup (supercapacitor not

available on the 9271-8i)

■

Factory-configured RAID options available: RAID 0, 1, 5, 6, and 10, (see

the RAID PIDs section in this table)

Table 8 Available Mezzanine Card RAID Options (continued)

Product ID (PID)

PID Description

NOTE: For any application requiring Virtualization support (VMs), with
write cache/scalable performance, use the 9271CV-8I RAID controller
instead of the mezzanine RAID controllers (UCSC-RAID-11-C220 or
UCSC-RAID-MZ-220), as the latter controllers do not support a write
cache.