Cisco Cisco TelePresence MX700 Riferimenti tecnici
D15335.03
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
52
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Cameras SpeakerTrack Whiteboard Mode
This setting applies to systems with a dual camera (speaker track).
Define whether to enable the Snap to Whiteboard feature or not.
The Snap to Whiteboard feature relies on a speaker track camera. When a presenter is stand-
ing next to the whiteboard, the camera will capture both the presenter and the whiteboard if
the Snap to Whiteboard feature is enabled. If the feature is disabled, only the presenter will be
captured.
The Snap to Whiteboard feature is set up from the Touch controller.
Requires user role: ADMIN, USER
Default value: Off
Default value: Off
USAGE:
xConfiguration Cameras SpeakerTrack Whiteboard Mode:
Mode
where
Mode
: Off/On
Off: The Snap to Whiteboard feature is disabled.
Off: The Snap to Whiteboard feature is disabled.
On: The Snap to Whiteboard feature is enabled.
Conference configuration
xConfiguration Conference AutoAnswer Mode
Define the auto answer mode. Use the Conference AutoAnswer Delay setting if you want
the system to wait a number of seconds before answering the call, and use the Conference
AutoAnswer Mute setting if you want your microphone to be muted when the call is answered.
Requires user role: ADMIN
Default value: Off
Default value: Off
USAGE:
xConfiguration Conference AutoAnswer Mode:
Mode
where
Mode
: Off/On
Off: You must answer incomming calls manually by tapping Answer on the Touch
Off: You must answer incomming calls manually by tapping Answer on the Touch
controller.
On: The system automatically answers incoming calls, except if you are already in a
call. You must always answer or decline incoming calls manually when you are already
engaged in a call.
xConfiguration Conference AutoAnswer Mute
Define if the microphone shall be muted when an incoming call is automatically answered.
Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN
Default value: Off
Default value: Off
USAGE:
xConfiguration Conference AutoAnswer Mute:
Mute
where
Mute
: Off/On
Off: The incoming call will not be muted.
Off: The incoming call will not be muted.
On: The incoming call will be muted when automatically answered.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration