Cisco Cisco TelePresence MX700 Riferimenti tecnici
D15335.03
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
92
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Video Output Connector [1..3] MonitorRole
The monitor role describes which video streams will be shown on the monitor connected to this
video output connector. Together the Video Monitors setting and the MonitorRole settings for
all outputs define which layout (video streams) will be shown on each monitor.
Requires user role: ADMIN
Default value: Auto
Default value: Auto
USAGE:
xConfiguration Video Output Connector
n
MonitorRole:
MonitorRole
where
n
: Unique ID that identifies the video output connector. Range: 1..3
MonitorRole
: Auto/First/Second/PresentationOnly/Third/Recorder
Auto: The system will detect when a monitor is connected, and a monitor role (First,
Second, Third) that corresponds with the Video Monitors setting will be assigned
automatically.
First/Second/Third: Define the role of the monitor in a multi-monitor setup. In a single-
monitor setup, there is no difference between First, Second and Third.
PresentationOnly: Show presentation video stream if active, and nothing else. Monitors/
outputs with this monitor role are disregarded by the Video Monitors setting.
Recorder: Show all participants, including the local main video (self-view). If active, also
show the presentation. Monitors/outputs with this monitor role are disregarded by the
Video Monitors setting.
xConfiguration Video Output Connector [n] Resolution
This setting applies to Connector [2..3] for MX800 Single, and Connector [3] for MX700 and
MX800 Dual.
Define the resolution and refresh rate for the connected screen.
Define the resolution and refresh rate for the connected screen.
Requires user role: ADMIN
Default value: Auto
Default value: Auto
USAGE:
xConfiguration Video Output Connector
n
Resolution:
Resolution
where
n
: Unique ID that identifies the video output connector. Range: 2..3 for single monitor
systems; 3..3 for dual monitor systems
Resolution
: Auto/1280_720_50/1280_720_60/1920_1080_50/1920_1080_60/1920_1200
_50/1920_1200_60
Auto: The system will automatically try to set the optimal resolution based on negotia-
tion with the connected monitor.
1280_720_50: The resolution is 1280 x 720, and the refresh rate is 50 Hz.
1280_720_60: The resolution is 1280 x 720, and the refresh rate is 60 Hz.
1920_1080_50: The resolution is 1920 x 1080, and the refresh rate is 50 Hz.
1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.
1920_1200_50: The resolution is 1920 x 1200, and the refresh rate is 50 Hz.
1920_1200_60: The resolution is 1920 x 1200, and the refresh rate is 60 Hz.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration