Cisco Cisco TelePresence MX700 Riferimenti tecnici

D15335.03

 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016. 

Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

93

Cisco TelePresence MX700 and MX800

API Reference Guide

xConfiguration Video Presentation DefaultSource

Define which video input source to use as a default presentation source. This setting may be 

used by the API and 3rd party user interfaces, but is not relevant when using Touch 10 or the 

TRC6 remote control.

Requires user role: ADMIN, USER
Default value: 3

USAGE:

xConfiguration Video Presentation DefaultSource: 

where

: 1/2/3/4

The video input source to use as default presentation source.

xConfiguration Video Selfview Default Mode

Define if the main video source (self-view) shall be displayed on screen after a call. The position 

and size of the self-view window is determined by the Video Selfview Default PIPPosition and 

the Video Selfview Default FullscreenMode settings respectively.

Requires user role: ADMIN
Default value: Current

USAGE:

xConfiguration Video Selfview Default Mode: 

where

: Off/Current/On
Off: self-view is switched off when leaving a call.

Current: self-view is left as is, i.e. if it was on during the call, it remains on after the call; 

if it was off during the call, it remains off after the call.

On: self-view is switched on when leaving a call.

xConfiguration Video Selfview Default FullscreenMode

Define if the main video source (self-view) shall be shown in full screen or as a small picture-

in-picture (PiP) after a call. The setting only takes effect when self-view is switched on (see the 

Video Selfview Default Mode setting).

Requires user role: ADMIN
Default value: Current

USAGE:

xConfiguration Video Selfview Default FullscreenMode: 

where

: Off/Current/On

Off: self-view will be shown as a PiP.

Current: The size of the self-view picture will be kept unchanged when leaving a call, i.e. 

if it was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the 

call, it remains fullscreen after the call.

On: The self-view picture will be shown in fullscreen.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



xConfiguration