Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
Creating a SIP profile
You can copy a profile to use as a template.
Navigate to
Device > Device Settings > SIP Profile
.
Copy a profile to use as a template: Click
Find
to list all
profiles, then select a profile and click
Copy
. This action
opens the
SIP Profile Configuration
page.
Or: Click
Add New
to create a new profile. This action
opens the
SIP Profile Configuration
page.
SIP Profile configuration
Navigate to the
SIP Profile Information
section:
Name:
Enter the
Name
for the profile.
Use Fully Qualified Domain Name in SIP Requests:
Select
Enable
to enable the called endpoint to
return the call using the received or missed call
list (the history list). See also
SDP Session-level Bandwidth Modifier for Early Offer
and Reinvites:
Set to
TIAS and AS
.
Navigate to the
Trunk Specific Configuration
section:
Allow Presentation Sharing using BFCP:
Select
Enable
to allow presentation sharing.
Allow IX Application Media:
Select
Enable
to enable the ActiveControl feature, if
available on the endpoint.
When done click
Save
.
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Deployment Guide
D15336.01 Deployment gude for TelePresence Endpoints on CUCM, DECEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
9
Navigate to the
Trunk Specific Configuration
section.
Add New
or
Copy
a profile and navigate to the
SIP Profile Information
section.
Contents
Introduction
CUCM configuration
Endpoint configuration
Appendices
Contact
CUCM configuration