Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D14850.13 MX200 and MX300 Administrator Guide TC7.3, OCTOBER 2015.

Cisco TelePresence MX200 and MX300

Administrator Guide

Conference [1..1] MaxTotalTransmitCallRate

This configuration applies when using a video system's built-in MultiSite feature (optional) to

host a multipoint video conference.
Specify the maximum overall transmit bit rate allowed. The bit rate will be divided fairly among

all active calls at any time. This means that the individual calls will be up-speeded or down-

speeded as appropriate when someone leaves or enters a multipoint conference, or when a call

is put on hold (suspended) or resumed.
The maximum transmit bit rate for each individual call is defined in the Conference

MaxTransmitCallRate setting.

Requires user role: ADMIN
Value space: <64..10000>

Range: Select a value between 64 and 10000.

Example:

Conference 1 MaxTotalTransmitCallRate: 10000

Conference [1..1] MaxTotalReceiveCallRate

This configuration applies when using a video system's built-in MultiSite feature (optional) to

host a multipoint video conference.
Specify the maximum overall receive bit rate allowed. The bit rate will be divided fairly among

all active calls at any time. This means that the individual calls will be up-speeded or down-

speeded as appropriate when someone leaves or enters a multipoint conference, or when a call

is put on hold (suspended) or resumed.
The maximum receive bit rate for each individual call is defined in the Conference

MaxReceiveCallRate setting.

Requires user role: ADMIN
Value space: <64..10000>

Range: Select a value between 64 and 10000.

Example:

Conference 1 MaxTotalReceiveCallRate: 10000

Conference [1..1] VideoBandwidth Mode

Set the conference video bandwidth mode.

Requires user role: ADMIN
Value space: <Dynamic/Static>

Dynamic: The available transmit bandwidth for the video channels are distributed among the

currently active channels. If there is no presentation, the main video channels will use the

bandwidth of the presentation channel.
Static: The available transmit bandwidth is assigned to each video channel, even if it is not

active.

Example:

Conference 1 VideoBandwidth Mode: Dynamic

Conference [1..1] VideoBandwidth MainChannel Weight

The available transmit video bandwidth is distributed on the main channel and presentation

channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main

channel weight is 2 and the presentation channel weight is 1, then the main channel will use

twice as much bandwidth as the presentation channel.

Requires user role: ADMIN
Value space: <1..10>

Range: 1 to 10.

Example:

Conference 1 VideoBandwidth MainChannel Weight: 5

Conference [1..1] VideoBandwidth PresentationChannel Weight

The available transmit video bandwidth is distributed on the main channel and presentation

channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main

channel weight is 2 and the presentation channel weight is 1, then the main channel will use

twice as much bandwidth as the presentation channel.

Requires user role: ADMIN
Value space: <1..10>

Range: 1 to 10.

Example:

Conference 1 VideoBandwidth PresentationChannel Weight: 5

Conference [1..1] Presentation RelayQuality

Not applicable in this version.

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings