Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D14850.13 MX200 and MX300 Administrator Guide TC7.3, OCTOBER 2015.

Cisco TelePresence MX200 and MX300

Administrator Guide

Conference [1..1] Presentation OnPlacedOnHold

Define whether or not to continue sharing a presentation after the remote site has put you on

hold.

Requires user role: ADMIN
Value space: <Stop/NoAction>

Stop: The video system stops the presentation sharing when the remote site puts you on

hold. The presentation will not continue when the call is resumed.
NoAction: The video system will not stop the presentation sharing when put on hold. The

presentation will not be shared while you are on hold, but it will continue automatically when

the call is resumed.

Example:

Conference 1 Presentation OnPlacedOnHold: NoAction

Conference [1..1] Multipoint Mode

Define how the video system handles multiparty video conferences.
If registered to a Cisco TelePresence Video Communication Server (VCS), the video system

can use the MultiWay network solution. MultiWay requires that the video network includes

a multipoint control unit (MCU). If registered to a Cisco Unified Communications Manager

(CUCM), the video system can use the CUCM conference bridge. Both MultiWay and the CUCM

conference bridge allows you to set up conferences with many participants.

Requires user role: ADMIN
Value space: <Auto/Off/MultiWay/CUCMMediaResourceGroupList>

Auto: The multipoint method available will be choosen automatically; if none are available the

Multipoint Mode will automatically be set to Off.
Off: Multiparty conferences are not allowed.
MultiWay: Multiparty conferences are set up using the MultiWay service. If MultiWay is

chosen when the MultiWay service is not available, the Multipoint Mode will automatically be

set to Off. This may occur when the NetworkServices MultiWay Address setting is empty or

not properly set.
CUCMMediaResourceGroupList: Multiparty conferences (ad hoc conferences) will be hosted

by the CUCM configured conference bridge. This setting is provisioned by CUCM in a CUCM

environment and should never be set manually by the user.

Example:

Conference 1 Multipoint Mode: Auto

Conference [1..1] IncomingMultisiteCall Mode

Select whether or not to allow incoming calls when already in a call/conference.

Requires user role: ADMIN
Value space: <Allow/Deny>

Allow: You will be notified when someone calls you while you are already in a call. You can

accept the incoming call or not. The ongoing call may be put on hold while answering the

incoming call; or you may merge the calls (requires MultiSite or MultiWay support).
Deny: An incoming call will be rejected if you are already in a call. You will not be notified

about the incoming call. However, the call will appear as a missed call in the call history list.

Example:

Conference 1 IncomingMultisiteCall Mode: Allow

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings