Cisco Cisco IOS Software Release 12.2
12
Release Notes for the Cisco uBR10012 Universal Broadband Router for Cisco IOS Release 12.2 XF
OL-1938-01
New and Changed Information
New and Changed Information
The following sections list the new hardware and software features supported by the Cisco uBR10012
router for Cisco IOS Release 12.2(4)XF.
router for Cisco IOS Release 12.2(4)XF.
New Hardware Features in Release 12.2(4)XF
Cisco IOS Release 12.2(4)XF includes support for the following new hardware features.
Cisco uBR-LCP-MC16C Cable Interface Line Card
Cisco IOS Release 12.2(4)XF adds support for the Cisco uBR-LCP-MC16C cable interface line card,
which is a combination of the Cisco uBR-LCP and Cisco uBR-MC16C line cards. The Cisco uBR-LCP
card adapts the Cisco uBR-MC16C to the electrical requirements and form factor of the
Cisco uBR10012 chassis.
which is a combination of the Cisco uBR-LCP and Cisco uBR-MC16C line cards. The Cisco uBR-LCP
card adapts the Cisco uBR-MC16C to the electrical requirements and form factor of the
Cisco uBR10012 chassis.
The Cisco uBR-LCP-MC16C line card provides one downstream and six upstreams that support the
DOCSIS (Annex B) 6 MHz North American channel plans using the ITU J.83 Annex B RF standard.
The downstream uses a 6 MHz channel width in the 85 to 860 MHz frequency range, and the upstream
supports the 5 to 42 MHz frequency range.
DOCSIS (Annex B) 6 MHz North American channel plans using the ITU J.83 Annex B RF standard.
The downstream uses a 6 MHz channel width in the 85 to 860 MHz frequency range, and the upstream
supports the 5 to 42 MHz frequency range.
The Cisco uBR10012 chassis supports a maximum of eight Cisco uBR-LCP-MC16C line cards. The
Cisco uBR10012 chassis also supports the Cisco uBR-LCP-MC16C card along with any combination of
the other supported cable interface line cards, up to a maximum of eight cards.
Cisco uBR10012 chassis also supports the Cisco uBR-LCP-MC16C card along with any combination of
the other supported cable interface line cards, up to a maximum of eight cards.
Note
The Cisco uBR-LCP line processor card must be at revision 4.4 or greater and be using the boothelper
image from Cisco IOS Release 12.2(2)XF1 or later to support the Cisco uBR-MC16C cable interface
line card.
image from Cisco IOS Release 12.2(2)XF1 or later to support the Cisco uBR-MC16C cable interface
line card.
Cisco uBR-LCP-MC16E Cable Interface Line Card
Cisco IOS Release 12.2(4)XF adds support for the Cisco uBR-LCP-MC16E cable interface line card,
which is a combination of the Cisco uBR-LCP and Cisco uBR-MC16E line cards. The Cisco uBR-LCP
card adapts the Cisco uBR-MC16E to the electrical requirements and form factor of the
Cisco uBR10012 chassis.
which is a combination of the Cisco uBR-LCP and Cisco uBR-MC16E line cards. The Cisco uBR-LCP
card adapts the Cisco uBR-MC16E to the electrical requirements and form factor of the
Cisco uBR10012 chassis.
The Cisco uBR-LCP-MC16E cable interface line card provides one downstream and six upstreams that
support the EuroDOCSIS (Annex A) standard. EuroDOCSIS supports the 8 MHz Phase Alternating Line
(PAL) and Systeme Electronique Couleur Avec Memoire (SECAM) channel plans using the ITU J.112
Annex A RF standard. The downstream uses an 8 MHz channel width in the 85 to 860 MHz frequency
range, and the upstream supports multiple channel widths in the 5 to 65 MHz frequency range.
support the EuroDOCSIS (Annex A) standard. EuroDOCSIS supports the 8 MHz Phase Alternating Line
(PAL) and Systeme Electronique Couleur Avec Memoire (SECAM) channel plans using the ITU J.112
Annex A RF standard. The downstream uses an 8 MHz channel width in the 85 to 860 MHz frequency
range, and the upstream supports multiple channel widths in the 5 to 65 MHz frequency range.
The Cisco uBR10012 chassis supports a maximum of eight Cisco uBR-LCP-MC16E line cards. The
Cisco uBR10012 chassis also supports the Cisco uBR-LCP-MC16E card along with any combination of
the other supported cable interface line cards, up to a maximum of eight cards.
Cisco uBR10012 chassis also supports the Cisco uBR-LCP-MC16E card along with any combination of
the other supported cable interface line cards, up to a maximum of eight cards.
Note
The Cisco uBR-LCP line processor card must be at revision 4.4 or greater and be using the boothelper
image from Cisco IOS Release 12.2(2)XF1 or later to support the Cisco uBR-MC16E cable interface
line card.
image from Cisco IOS Release 12.2(2)XF1 or later to support the Cisco uBR-MC16E cable interface
line card.