Cisco Cisco IOS Software Release 12.2

Cisco IOS Release 12.2(1)XF introduces the Cisco uBR10012 router chassis and the FRU components 
described in Cisco uBR10000 Series Universal Broadband Router Hardware Installation Guide and the 
Field Replaceable Units (FRUs) documents.

Cisco IOS Release 12.2(1)XF introduces software support for the Cisco uBR10012 router, as described 
in the Cisco uBR10000 Series Universal Broadband Router Software Configuration Guide. 

To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules, 
go to the Cisco MIB web site on Cisco.com at 

.

The Cisco uBR10012 universal broadband router supports the following categories of MIBs:

SNMP standard MIBs—These MIBs are required by any agent supporting SNMPv1 or SNMPv2 
network management.

Cisco’s platform and network-layer enterprise MIBs—Common across most of Cisco’s router 
platforms. If your network management applications are already configured to support other Cisco 
routers, such as the 2600 series router, no further configuration is needed unless the version of 
Cisco IOS software being used has updated these MIBs.

Cable-specific MIBs—Provide information about the cable interfaces and related information on the 
Cisco uBR10012 router. They include both DOCSIS-specific MIBs and Cisco-specific enterprise 
MIBs. If your network management applications have not already been configured for the 
Cisco uBR10012 routers, these MIBs must be loaded. 

Deprecated MIBs—Supported in earlier releases of Cisco IOS software but have been replaced by 
more standardized, scalable MIBs. Network Management applications and scripts should convert to 
the replacement MIBs as soon as possible.

CISCO-ENTITY-VENDORTYPE-OID-MIB 

The  cable-specific MIBs are described in the following section. For information on the SNMP standard 
MIBs and Cisco’s platform and network-layer enterprise MIBs, see Cisco’s MIB web site at 
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.