Cisco Cisco IOS Software Release 12.2(2)XA
MGCP 1.0 Including NCS 1.0 and TGCP 1.0 Profiles
timeout tone busy
80
Cisco IOS Release 12.2(2)XA
timeout tone busy
To configure the busy tone timeout value, use the timeout tone busy MGCP profile command. To set
the value to the default, use the no form of this command.
the value to the default, use the no form of this command.
timeout tone busy busytone-value
no timeout tone busy busytone-value
Syntax Description
Defaults
30 seconds
Command Modes
MGCP profile
Command History
Usage Guidelines
The gateway uses the busy tone timeout value when the call agent does not provide a timeout value
associated with the request to generate a busy tone signal.
associated with the request to generate a busy tone signal.
Examples
The following example shows how to set the busy tone timeout value to 45 seconds:
Router(config)# mgcp profile nyc-ca
Router(config-mgcp-profile)# timeout tone busy 45
Related Commands
busytone-value
Specifies the busy tone timeout value, in seconds. Range is from 1 to 600.
Release
Modification
12.2(2)XA
This command was introduced.
Command
Description
mgcp
Starts and allocates resources for the MGCP daemon.
Initiates MGCP profile mode to create and configure a named MGCP
profile associated with one or more endpoints, or to configure the default
profile.
profile associated with one or more endpoints, or to configure the default
profile.