Cisco Cisco IOS Software Release 12.2(2)XA
MGCP 1.0 Including NCS 1.0 and TGCP 1.0 Profiles
timeout tone cot2
82
Cisco IOS Release 12.2(2)XA
timeout tone cot2
To configure the continuity 2 (cot2) tone timeout value, use the timeout tone cot2 MGCP profile
command. To set the value to the default, use the no form of this command.
command. To set the value to the default, use the no form of this command.
timeout tone cot2 cot2tone-value
no timeout tone cot2 cot2tone-value
Syntax Description
Defaults
3 seconds
Command Modes
MGCP profile
Command History
Usage Guidelines
The gateway uses the continuity2 (cot2) tone timeout value when the call agent does not provide a
timeout value associated with the request to generate a cot2 tone signal.
timeout value associated with the request to generate a cot2 tone signal.
Continuity1 and continuity2 tone signals are used in ISUP calls to determine that a call path has been
established before connecting a call. The call agent is provisioned to know which test to apply to a given
endpoint.
established before connecting a call. The call agent is provisioned to know which test to apply to a given
endpoint.
Examples
The following example shows the continuity2 tone timeout value being set to 50 seconds:
Router(config)# mgcp profile nyc-ca
Router(config-mgcp-profile)# timeout tone cot2 50
Related Commands
cot2tone-value
Specifies the continuity2 (cot2) tone timeout value, in seconds. Range is
from 1 to 600.
from 1 to 600.
Release
Modification
12.2(2)XA
This command was introduced.
Command
Description
mgcp
Starts and allocates resources for the MGCP daemon.
Initiates MGCP profile mode to create and configure a named MGCP
profile associated with one or more endpoints, or to configure the default
profile.
profile associated with one or more endpoints, or to configure the default
profile.
Sets continuity1 tone timeout value for MGCP.