Cisco Cisco IOS Software Release 12.2(2)XA
MGCP 1.0 Including NCS 1.0 and TGCP 1.0 Profiles
timeout tone dial
83
Cisco IOS Release 12.2(2)XA
timeout tone dial
To configure the dial tone timeout value, use the timeout tone dial MGCP profile command. To set the
value to the default, use the no form of this command.
value to the default, use the no form of this command.
timeout tone dial dialtone-value
no timeout tone dial dialtone-value
Syntax Description
Defaults
16 seconds
Command Modes
MGCP profile
Command History
Usage Guidelines
The gateway uses the dial tone timeout value when the call agent does not provide timeout values
associated with the request to generate a dial tone signal.
associated with the request to generate a dial tone signal.
Examples
The following example shows the dial tone timeout value being set to 25 seconds:
Router(config)# mgcp profile nyc-ca
Router(config-mgcp-profile)# timeout tone dial 25
Related Commands
dialtone-value
Specifies the dial tone timeout value, in seconds. Range is from 1 to 600.
Release
Modification
12.2(2)XA
This command was introduced.
Command
Description
mgcp
Starts and allocates resources for the MGCP daemon.
Initiates MGCP profile mode to create and configure a named MGCP
profile associated with one or more endpoints, or to configure the default
profile.
profile associated with one or more endpoints, or to configure the default
profile.