Cisco Cisco IOS Software Release 12.4(2)XB6
5
Release Notes for the Cisco Broadband Wireless Gateway 2.1 for Cisco IOS Release 12.4(24)YG1
OL-21495-01
Limitations and Restrictions
•
CAR/AAA Configuration
•
EAP Authentication
•
Security Key Exchange
•
IP Address Allocation using DHCP
•
Service Flow creation and Management
•
Qos Support
•
User Group Management
•
AAA Accounting Start/Stop/Interim
•
Un Predictive Handoff
•
KeepAlive Support on R6
•
Session Redundancy
•
Load Balancing
•
MIB Support
•
EAP and PAP authentication
•
Host behind Mobile Subscriber
•
Subscriber Session Caching
•
Maximum host overflow
•
Critical Service Flow
•
DHCP Release relay-only
•
MS Attachment Response delay
•
Multiple SLA support
•
De-registration reason in de-registration request
•
Static host support
•
Maintenance mode for user group
•
Support for service state AAA attribute
Limitations and Restrictions
The following limitations and restrictions apply to the Cisco BWG feature in Cisco IOS Release
12.4(24)YG1:
12.4(24)YG1:
•
To avoid issues with high CPU usage, we recommend the following configurations:
–
To reduce the CPU usage during bootup, disable logging to the console terminal by configuring
the no logging console global configuration command.
the no logging console global configuration command.
–
To ensure that the HSRP interface does not declare itself active until it is ready to process a peers
Hello packets, configure the delay period before the initialization of HSRP groups with the
standby delay minimum 100 reload 100 interface configuration command under the HRSP
interface.
Hello packets, configure the delay period before the initialization of HSRP groups with the
standby delay minimum 100 reload 100 interface configuration command under the HRSP
interface.