Cisco Cisco IOS Software Release 12.4(22)XR

 lists the new VPDN MIB objects in Cisco PDSN Release 5.1.

The common NAI feature, introduced in Cisco PDSN Release 5.1, involves a global NAI and calling 
station identification (CLID) on all interactions with external entities, and the CLID as the local 
identifier (local NAI) within the entity (Foreign Agent). 

With a redundancy setup, this attribute is synchronized to standby mode for each flow in both active and 
standby modes. This attribute is synchronized to standby mode along with other flow attributes. The 
following CLI command is used to enable this feature:

router(config)# ip mobile foreign-agent mn-identifier calling-station-id

To remove the configuration, use:

router(config)# no ip mobile foreign-agent mn-identifier calling-station-id 

Configure the following CLI commands also.

To send 3GPP2 CLID NVSE in MIP RRQ:

Specifies the total number of PPP connections renegotiated 
per PCF due to reasons other than IP address mismatch.

Specifies the role that Cisco PDSN assumes within a 
controller-member.

Type of cluster:

notApply indicates that Cisco PDSN does not assume 
any cluster role. Cisco PDSN assumes the cluster role, 
if the cCdmaClusterType is not a controller-member.

controller indicates that Cisco PDSN is the controller 
of the cluster.

member indicates that Cisco PDSN is a member of the 
cluster.

collocated indicates that Cisco PDSN is both controller 
and a member of the cluster.

Specifies the total number of connection attempts in all the 
VPDN tunnels of this tunnel.

Specifies the total number of successful connection 
attempts in all the VPDN tunnels of this tunnel.

Specifies the total number of failed connection attempts in 
all the VPDN tunnels of this tunnel.