Cisco Cisco IOS Software Release 12.2(35)SE
3
Release Notes for the Catalyst 2970 and Catalyst 3750 Switches, Cisco IOS Release 12.2(18)SE
OL-5023-04
System Requirements
Cluster Compatibility
This section describes how to choose command and standby command switches when a cluster consists
of a mixture of Catalyst switches. When creating a switch cluster or adding a switch to a cluster, follow
these guidelines:
of a mixture of Catalyst switches. When creating a switch cluster or adding a switch to a cluster, follow
these guidelines:
•
When you create a switch cluster, Cisco recommends configuring the highest-end switch in your
cluster as the command switch.
cluster as the command switch.
lists the cluster capabilities and Cisco IOS releases for the
switches. The switches are listed from highest to lowest end.
•
If you are managing the cluster through CMS, the switch that has the latest software should be the
command switch, unless your command switch is running Cisco IOS Release 12.1(19)EA1 or later.
command switch, unless your command switch is running Cisco IOS Release 12.1(19)EA1 or later.
•
The standby command switch must be the same type as the command switch. For example, if the
command switch is a Catalyst 3750 switch, all standby command switches must be Catalyst 3750
switches.
command switch is a Catalyst 3750 switch, all standby command switches must be Catalyst 3750
switches.
Catalyst 3750G-24T
24 10/100/1000 Ethernet ports
Cisco IOS Release 12.2(18)SE
Catalyst 3750G-24TS
24 10/100/1000 Ethernet ports and
4 SFP module slots
4 SFP module slots
Cisco IOS Release 12.2(18)SE
Catalyst 3750-48TS
48 10/100 Ethernet ports and
4 SFP module slots
4 SFP module slots
Cisco IOS Release 12.2(18)SE
Catalyst 3750-24PS
24 10/100 PoE
2
ports and 2 SFP
module slots
Cisco IOS Release 12.2(18)SE
Catalyst 3750-48PS
48 10/100 PoE ports and 4 SFP
module slots
module slots
Cisco IOS Release 12.2(18)SE
SFP modules
1000BASE-T, 1000BASE-SX,
1000BASE-LX, 1000BASE-ZX,
and CWDM
1000BASE-LX, 1000BASE-ZX,
and CWDM
3
–
Redundant power systems
Cisco RPS 300 Redundant Power
System
Cisco RPS 675 Redundant Power
System
System
Cisco RPS 675 Redundant Power
System
–
1.
SFP = small form-factor
2.
PoE =Power over Ethernet
3.
CWDM = Coarse Wave Division Multiplexer
Table 1
Catalyst 2970 and Catalyst 3750 Supported Hardware (continued)
Switch
Description
Supported by Minimum Cisco IOS Release
Table 2
Switch Software and Cluster Capability
Switch
Cisco IOS Release
Cluster Capability
Catalyst 3750
12.1(11)AX or later
Member or command switch
Catalyst 3560
12.1(19)EA1b or later
Member or command switch
Catalyst 3550
12.1(4)EA1 or later
Member or command switch
Catalyst 2970
12.1(11)AX or later
Member or command switch
Catalyst 2955
12.1(12c)EA1 or later
Member or command switch