Cisco Cisco IOS Software Release 12.2(27)SBC

In the following example, the configuration permits any SNMP manager to access all objects with 
read-only permissions using the community string public. 

Router# configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)# snmp-server community public ro

There is no explicit way to configure the CISCO-CBP-TARGET-MIB. However, for information on QoS 
configuration tasks and examples, see the 

, 

Release 12.4.

The following sections provide references related to the QoS: CBQoS Management—Policy-to-Interface 
Mapping Support feature.

QoS commands: complete command syntax, command 
modes, command history, defaults, usage guidelines, 
and examples

, 

Release 12.4T

, 

Release 12.2 SR

QoS configuration tasks

Release 12.4

SNMP commands: complete command syntax, 
command modes, command history, defaults, usage 
guidelines, and examples

Release 12.4T

Release 12.2 SR

SNMP configuration tasks

chapter in the Cisco IOS Network 

Management Configuration Guide, Release 12.4T

Other documentation

For information on using SNMP MIB features, see the appropriate 
documentation for your network management system.

No new or modified standards are supported by this 
feature, and support for existing standards has not been 
modified by this feature.