Cisco Cisco IOS Software Release 12.2(54)SE

Pagina di 40
 
6
Release Notes for the Catalyst 3750 Metro Switch Cisco IOS Release 12.2(54)SE
OL-22236-01
  Minimum Cisco IOS Release for Major Features
CFM support on a customer VLAN (C-VLAN), which allows a customer to provision maintenance 
intermediate points (MIPs) and Up maintenance endpoints (MEPs) on a C-VLAN component to 
provide a customer with visibility to network traffic on the C-VLAN. See the 
Support for the IEEE CFM (IEEE 802.1ap) MIB, which can be used as a tool to trace paths, to verify 
and to manage connectivity, and to detect faults in a network. See th
There is no limit to the number of times that you can enter the rep block port id port-id vlan 
vlan-list interface configuration command. You can block an unlimited number, range, or sequence 
of VLANs. (CSCta48811)
For the product identifier (PID) and version identifier (VID) of small form-factor pluggable (SFP) 
modules, the output of the show inventory user EXEC command displays either the correct 
information or Unspecified for the PID and nothing for the VID if the SFP does not have PID and 
VID information. (CSCsu60206)
Minimum Cisco IOS Release for Major Features
 lists the minimum software release required to support features on the Catalyst 3750 Metro switch. 
Note
Features not included in the table are available in all releases. You can see a list of features from the first 
release at this URL:
Table 3
Catalyst 3750 Metro Switch Features and the Minimum Cisco IOS Release Required
Feature
Minimum Cisco IOS 
Release Required
Support for the IEEE 802.1ad standard. 
12.2(54)SE 
CFM support on customer VLANs (C-VLANs). 
12.2(54)SE 
IEEE CFM MIB support.
12.2(54)SE 
Support for Layer 2 transport over MPLS interworking for Ethernet and VLAN interworking. 12.2(52)SE
Support for IPv6 QoS trust capability.
12.2(52)SE
Support for EEM 3.2, which introduces event detectors for Neighbor Discovery, Identity, and 
the MAC-Address-Table.
12.2(52)SE
Support for IP source guard on static hosts.
12.2(52)SE
IEEE 802.1x User Distribution for deployments with multiple VLANs (for a group of users) to 
improve network scalability by load balancing users across different VLANs. The RADIUS 
server assigns authorized users to the least populated VLAN in the group.
12.2(52)SE
Support for Network Edge Access Topology (NEAT) for changing the port host mode and 
applying a standard port configuration to the authenticator switch port.
12.2(52)SE