Cisco Cisco IOS Software Release 12.2(53)SE
3
System Requirements
Note
12.2(46)SE
SFP modules
1
GLC-T
GLC-SX-MM
GLC-LH-SM
GLC-LH-SM
SFP Modules require the use of TwinGig adapter
(CVR-X2-SFP).
(CVR-X2-SFP).
12.2(52)SE
Supports OneX
(CVR-X2-SFP10G)
and these SFP+
modules
(CVR-X2-SFP10G)
and these SFP+
modules
(For the Catalyst
Switch
Modules 3110G
and 3110X)
Switch
Modules 3110G
and 3110X)
SFP-10G-SR
SFP-10G-LR
SFP-10G-LRM
SFP-10G-LR
SFP-10G-LRM
Only version 02 or later CX1
2
cables are supported:
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
12.2(53)SE
1.
SFP = small form-factor pluggable
2.
The CX1 cables are used with the OneX converters.
Catalyst Switch Module Supported Hardware (continued)
Table 2
IBM BladeCenter Supported Switch Modules
Switch Module 3110G
Switch Module 3110X
Switch Module 3012
The Cisco Catalyst Switch modules are not supported in the MSIM-T module.
Yes
Yes
Yes
BladeCenter S (BC-S)
No
No
Yes
BladeCenter Multi-switch
Interconnect Module
(MSIM)
Interconnect Module
(MSIM)
Yes
2
2.
The advanced Management Module (aMM) firmware must use Version 1.42i or higher.
Yes
Yes