Cisco Cisco IPS 4255 Sensor
17
Release Notes for Cisco Intrusion Prevention System 6.1(1)E1
OL-17173-01
After Upgrading to Cisco IPS 6.1(1)E1
Importing a New SSL Certificate
If necessary, import the new SSL certificate for the upgraded sensor in to each tool being used to monitor
the sensor.
the sensor.
For More Information
For the procedure for configuring TLS/SSL, for the CLI refer to
, and for IME refer to
Logging In to IDM
IDM is a web-based, Java Web Start application that enables you to configure and manage your sensor.
The web server for IDM resides on the sensor. You can access it through Internet Explorer or Firefox
web browsers.
The web server for IDM resides on the sensor. You can access it through Internet Explorer or Firefox
web browsers.
To log in to IDM, follow these steps:
Step 1
Open a web browser and enter the sensor IP address. A Security Alert dialog box appears.
https://
sensor_ip_address
Note
IDM is already installed on the sensor.
Note
The default IP address is 192.168.1.2/24,192.168.1.1, which you change to reflect your network
environment when you initialize the sensor. When you change the web server port, you must
specify the port in the URL address of your browser when you connect to IDM in the format
https://sensor_ip_address:port (for example, https://10.1.9.201:1040).
environment when you initialize the sensor. When you change the web server port, you must
specify the port in the URL address of your browser when you connect to IDM in the format
https://sensor_ip_address:port (for example, https://10.1.9.201:1040).
Step 2
Click Yes to accept the security certificate. The Cisco IPS Device Manager Version 6.1 window appears.
Step 3
To launch IDM, click Run IDM. The JAVA loading message box appears, and then the Warning -
Security dialog box appears.
Security dialog box appears.
Step 4
To verify the security certificate, check the Always trust content from this publisher check box, and click
Yes. The JAVA Web Start progress dialog box appears. and then the IDM on ip_address dialog box
appears.
Yes. The JAVA Web Start progress dialog box appears. and then the IDM on ip_address dialog box
appears.
Step 5
To create a shortcut for IDM, click Yes. The Cisco IDM Launcher dialog box appears.
Note
You must have JRE 1.4.2 or JRE 1.5 (JAVA 5) installed to create shortcuts for IDM. If you have
JRE 1.6 (JAVA 6) installed, the shortcut is created automatically.
JRE 1.6 (JAVA 6) installed, the shortcut is created automatically.
Step 6
To authenticate IDM, enter your username and password, and click OK. IDM begins to load. If you
change panes from Home to Configuration or Monitoring before IDM has complete initialization, a
Status dialog box appears with the following message:
change panes from Home to Configuration or Monitoring before IDM has complete initialization, a
Status dialog box appears with the following message:
Please wait while IDM is loading the current configuration from the sensor.
The main window of IDM appears.