Cisco Cisco TelePresence MX700 Guida All'Installazione
Setting date, time and location
(When not set by a provisioning system)
You should check that the date and time settings are correct
when you set up your video conference system. The system
uses this information for example to time stamp messages
transmitted to gatekeepers and other network elements.
You can find the time in the top right corner of the Touch
controller display.
1. Tap
Settings > Date, Time & Location
.
2. Tap
24h
or
12h
to select the
Time Format
you prefer.
3. Tap
dd.mm.yy
,
mm.dd.yy
or
yy.mm.dd
to select the
Date
Format
you prefer.
4. Select the
Time Zone
your system is in. Step through the
list of available zones by tapping the - or + signs.
5. Set
Date & Time Mode
to
Auto
if you want time and date
to be regularly updated; otherwise, select
Manual
.
a. If you select
Manual
, enter the correct value for
Hour
,
Minute
,
Year
,
Month
, and
Day
. Tap the - and + signs
to increase or decrease a value.
b. If you select
Auto
, the NTP server address can be
automatically obtained from the network (set the
NTP
Mode
to
Auto
) or you can enter the
NTP Server
address
yourself (set
NTP Mode
to
Manual
).
6. Tap
Save
to confirm the changes, or
Undo
to leave without
saving.
7. Tap
Exit
to return to the home menu.
Back to task overview
Cisco TelePresence Video Systems
D14639.10 Video Systems Getting Started Guide TC6.2, July 2013.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
16
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Confirguration