Cisco Cisco TelePresence MX700 Guida All'Installazione
Provisioning set-up
(When using a provisioning system)
If in doubt for any of the parameters below, contact your
provisioning system provider.
See the administrator guide for your product to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to
Home > Settings > Administrator settings > Advanced
configuration > Provisioning > Mode
and select a provi-
sioning infrastructure:
• TMS – Cisco TelePresence Management System
• Callway – WebEx Telepresence
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying VCS,
• Callway – WebEx Telepresence
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying VCS,
then TMS and finally CUCM.
If you select
Off
, all configurations must be set manually on
the video system.
Set the required provisioning parameters
Which parameters to set depends on which infrastructure was selected.
TMS
1. Go to
Home > Settings > Administrator settings > Advanced
configuration > Provisioning > ExternalManager.
2. Enter the IP address or DNS name of the Cisco TMS server
in the
Address
input field.*
3. Enter the
Path
to the provisioning service in the corre-
sponding input field
.
4. It may be required to authenticate the video system
with Cisco TMS. If so, go back to
Provisioning,
and enter
LoginName
and
Password
in the respective input fields.
WebEx Telepresence (formerly Callway)
Upon ordering the Cisco WebEx Telepresence service, you
have received a
Video number
and an
Activation code
.
Please contact your company's WebEx Telepresence admin-
istrator, if you do not have a video phone number and an
activation code.
1. Go to
Home > Settings > Administrator settings > Advanced
configuration > Provisioning
2. Enter the Video number in the
LoginName
input field
.
3. Enter the Activation code in the
Password
input field
.
CUCM
1. Go to
Home > Settings > Administrator settings > Advanced
configuration > Provisioning > ExternalManager.
2. Enter the IP address or DNS name of the UCM provision-
ing server in the
Address
input field.*
You can find more details about setting up Cisco UCM provi-
sioning in the
guide.
NOTE:
If you wish to use Secure Mode for CUCM provision-
ing, you must set it up on the web interface.
Back to task overview
Always save the new value when you change a setting
• Drop down list selection: Navigate to the correct value
and press the
OK
( )
key to save, or press the left
arrow key to leave without saving.
• Text entry in an input field: Enter the text, navigate to
Ok/Save
to save the change, or navigate to
Cancel
to leave without saving; then press the
OK
( ) key
to
confirm.
* The DHCP server can be set up to provide the External Manager address
automatically (Option 242 for TMS; Option 150 for UCM). Any input set up
here overrides the setting provided by DHCP.
Cisco TelePresence Video Systems
D14639.10 Video Systems Getting Started Guide TC6.2, July 2013.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
18
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Confirguration