Cisco Cisco TelePresence MX700 Dépliant
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Quick Reference Guide
D14996.08 Administering TC7.0 Endpoints on CUCM 9.1.2, AUGUST 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
37
Setting the system password
The system password will restrict access to the TelePresence
endpoint and is set from the web interface or the API. The
endpoint is delivered with a default user account (admin) with
full credentials and no password is set.
If the endpoint is set up with an encrypted security profile
NOTE:
If the TelePresence endpoint is set up with an encrypted
security profile the endpoint will read the admin password from
the CUCM; given that:
•
Endpoint:
A user with administrator rights must exist on the
endpoint and the user name must be admin. The password
will be provisioned by CUCM unless the password was
blank on CUCM.
•
CUCM:
The user name must be admin and the password
cannot be blank.
Access through HTTP and SSH
Access to the endpoint through HTTP (web interface) and SSH
Access to the endpoint through HTTP (web interface) and SSH
(command line) is disabled by default when the endpoint is
registered to Cisco Unified CM.
If used with Cisco TelePresence Manager
NOTE:
The system password set on the endpoint must match
the value set in the Cisco Unified CM in order for the Cisco
TelePresence Manager (CTS-MAN) to discover the endpoint
and provide One Button to Push scheduling to it.
Using the web interface
Log in to the endpoint through the web interface with your
username and current password. If a password is currently
not set, use a blank password when logging on.
Set or change the system password
1. Click on the username in the upper right corner and
choose Change password in the drop down menu.
2. Enter the Current password, the New password, and
repeat the new password in the appropriate input fields.
The password format is a string with 0–64 characters.
The password format is a string with 0–64 characters.
3. Click Change password.
The new system password will apply when you log in through
the web interface or command line interface.
Using the command line interface
Open a command line interface (e.g. PuTTY) and log in to the
endpoint (codec) with your username and current password.
If a password is currently not set, use a blank password when
logging on.
Set or change the system password
xCommand SystemUnit AdminPassword Set
Password: ***********
The password format is a string with 0–64 characters.
The password format is a string with 0–64 characters.
The new system password will apply when you log in through
the command line interface. The endpoint (codec) must be
restarted to make the password apply to the web interface.
Contents
Introduction
CUCM configuration
Endpoint configuration
About passwords
Appendices
Endpoint configuration