Cisco Cisco TelePresence MX700 Dépliant
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Quick Reference Guide
D14996.08 Administering TC7.0 Endpoints on CUCM 9.1.2, AUGUST 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
39
Setting up provisioning
Please contact your Cisco Unified CM (CUCM) provider if in
doubt for any of the provisioning parameters.
For more information about the external manager address and
CTL files, refer to
Using the Touch panel
If you are connecting the system for the
first time, the Provisioning Wizard will start
automatically, otherwise, tap (Settings) >
Administrator > Provisioning.
Running the provisioning wizard
1. If the wizard is not already started, click
Start.
2. Choose Cisco UCM as the infrastructure
and click Next.
3.
If required
: Enter the IP address or DNS
name of the External Manager (the CUCM
cluster TFTP server address) in the input
field.
4.
If required
: Check the Delete old
Certificate Trust List (CTL) file checkbox.
If no CTL file exist on the endpoint, this
option will not be available.
5. Tap Register to complete the registration.
6. When successfully registered to CUCM a
message will appear and you will see the
address (URI) of the endpoint.
Using the remote control
If the system is in sleep mode, press any key
on the remote control to wake up the system.
Configuring the provisioning
1. Navigate to Home > Settings >
Administrator Settings > Advanced
Configuration > Provisioning.
2. Navigate to the ExternalManager section
and enter the IP address or DNS name of
the External Manager (the CUCM cluster
TFTP server address). Click Save.
3. From the drop down list, set the
Provisioning Mode to CUCM. The change
will take effect immediately.
Using the command line interface
Open a command line interface (e.g. PuTTY)
and log in to the endpoint (codec).
Configuring the provisioning
xConfiguration Provisioning Mode:
xConfiguration Provisioning Mode:
[must be CUCM]
xConfiguration Provisioning
xConfiguration Provisioning
ExternalManager Address:
[the CUCM cluster TFTP server address]
xConfiguration Provisioning
xConfiguration Provisioning
ExternalManager Protocol:
[must be HTTP for UCM mode]
xConfiguration Provisioning
xConfiguration Provisioning
HttpMethod:
[both GET and POST work in UCM mode]
xCommand Provisioning CUCM CTL
xCommand Provisioning CUCM CTL
Delete
[
If required
: delete the CTL file]
Using the web interface
Open a web browser, enter the IP address of
the endpoint, and log in with your user name
and password.
Configuring the provisioning
1. Navigate to Configuration > System
Configuration > Provisioning.
2. Navigate to ExternalManager section and
enter the Address, which can be an IP
address, DNS name, or the path of the
External Manager (the CUCM cluster TFTP
server address). Click Save.
3. Navigate to Mode and set the provisioning
mode CUCM. Click Save.
Contents
Introduction
CUCM configuration
Endpoint configuration
About passwords
Appendices
Endpoint configuration