Cisco Cisco TelePresence MX700 Dépliant
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Quick Reference Guide
D14996.08 Administering TC7.0 Endpoints on CUCM 9.1.2, AUGUST 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
43
Setting the menu password from the web
interface
1. Sign in to the web interface with your user name and
current password.
2. Go to
Configuration > System Configuration
.
3. Click
Set/Change Administrator Settings menu password
to open the menu password dialog.
4. Enter the password in the input field.
5. Click
Save
to set/change the password.
Use the remote control and on-screen menu, or the
Touch controller to find the IP address (IPv4 or IPv6).
Remote control and on-screen menu: Navigate to
Remote control and on-screen menu: Navigate to
Home > Settings > System information
.
Touch controller: Tap the upper, left corner of the
Touch controller to open the drop down window. Then
tap
Settings > System Information
.
Setting the menu password using the remote
control
1. In the on screen menu, go to
Home > Settings >
Administrator settings > Set menu password
.
The password should be a string with 0–255 characters.
To deactivate the password leave the password input
To deactivate the password leave the password input
field empty.
2. Enter the menu password in the input field. The password
you enter is hidden; each character is replaced with a star
(*).
On the remote control, press the # key to toggle between
On the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/
ABC/123.
3. Select
Save
to save the changes, or
Cancel
to leave
without saving.
4. Press
Home
(
) to exit.
Setting the menu password
The menu password protects the Administrator Settings
menu that is available on-screen when using the remote
control.
When starting up the video conference system for the first
When starting up the video conference system for the first
time anyone can access these settings, because the menu
password is not set.
We strongly recommend that you set a menu
password, because the administrator settings may
severely affect the behavior of the system.
Note that the menu password, as from software version
TC7.0, applies only to the on-screen Administrator Settings
menu; it does not apply to the Administrator menu on the
Touch 8 controller.
Contents
Introduction
CUCM configuration
Endpoint configuration
About passwords
Appendices
About passwords