Cisco Cisco TelePresence MX700 Dépliant
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Quick Reference Guide
D14996.08 Administering TC7.0 Endpoints on CUCM 9.1.2, AUGUST 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
44
Setting a root password
You can protect the file system of your video system by
setting a password for the root user.
The root user is disabled by default. You have to use the
The root user is disabled by default. You have to use the
command line interface to enable the root user and set a root
password.
Activate the root user and set the password
Perform the following steps to activate the root user and set a
password for it:
1. Connect to the system through the network or the
system's serial data port (if available) and open a
command line interface (SSH or Telnet).
2. Sign in to the system with user name and password. The
user needs ADMIN rights.
3. Type the following command:
systemtools rootsettings on <password>
The root password is not the same as the system
(admin) password.
Contents
Introduction
CUCM configuration
Endpoint configuration
About passwords
Appendices
About passwords