Cisco Cisco Aironet 2600e Access Point Guida All'Installazione
13
Using DHCP Option 43
You can use DHCP Option 43 to provide a list of controller IP addresses to the access points, enabling them to find and join a
controller. For additional information, refer to the
controller. For additional information, refer to the
.
Checking the Access Point LED
.
Note
Regarding LED status colors, it is expected that there will be small variations in color intensity and hue from unit to
unit. This is within the normal range of the LED manufacturer’s specifications and is not a defect.
unit. This is within the normal range of the LED manufacturer’s specifications and is not a defect.
Figure 5
Access Point LED Location
The access point status LED indicates various conditions and are described in
.
1
Status LED
Table 1
LED Status Indications
Message
Type
Type
Status
LED
LED
Message
Meaning
Meaning
Boot loader status
sequence
sequence
Blinking green
DRAM memory test in progress
DRAM memory test OK
Board initialization in progress
Initializing FLASH file system
FLASH memory test OK
Initializing Ethernet
Ethernet OK
Starting Cisco IOS
Initialization successful
Association status
Green
Normal operating condition, but no wireless
client associated
client associated
Blue
Normal operating condition, at least one wireless
client association
client association
272378
1