Cisco Cisco Aironet 1810w Access Point Guida All'Installazione

To mount the AP on a table or horizontal surface using the AIR-OEAP1810-CRD= cradle kit, follow 
these instructions:

Plug in the RJ-45 jumper cable into the PoE and Pass-Thru ports on the back of the AP. See 

.

Attach the back cover (see 

) to the back of the AP. The hook feature on the back 

cover slides into the grooves beneath the PoE and Pass-Thru ports.

Optionally, fasten the cradle to the horizontal surface or table using two screws. See 

.

Insert the AP into the cradle. Ensure that the AP is fully seated in the cradle. See 

.