Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch Manuale Di Manutenzione

Managing User Accounts

Cisco Small Business SF200E Series Advanced Smart Switch

46

 

As you enter a password, the number and color of vertical bars changes to 
indicate the password strength, as follows:

•

Red—The password fails to meet the minimum complexity requirements. 
The text “Below Minimum” displays to the right of the meter.

•

Orange—The password meets the minimum complexity requirements but 
the password strength is weak. The text “Weak” displays to the right of the 
meter.

•

Green—The password is strong. The text “Strong” displays to the right of the 
meter.

If Password Strength Enforcement is enabled, Apply is not available until the 
strength meter is orange and the password is confirmed.

When adding a user, you can temporarily disable the password strength check to 
allow configuring a password that does not meet the strength check criteria. Click 
Disable Password Strength Enforcement and then click OK when the warning 
displays. 

To disable the Password Strength Enforcement for all users, or to configure its 
characteristics, use the Password Strength page.

Click Apply and then click Close. Your changes are saved to the Running 
Configuration.

To change a user password:

Click Administration > User Accounts in the navigation window.

Select the user to configure and click Edit.

Enter a password between 0 and 64 characters (depending upon the 

 setting) and confirm the password.