Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Mode Show Commands (Q-S)
show qos npu inter-subscriber traffic ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
show qos npu inter-subscriber traffic
Displays configuration information pertaining to NPU QoS priority queue bandwidth allocation and sharing.
Product
GGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays NPU QoS priority queue bandwidth allocation configuration information.
Displays NPU QoS priority queue bandwidth sharing configuration information.
Usage
Use this command to verify configuration information and for troubleshooting.
When the bandwidth keyword is used, the output is a table showing the configuration status, the priority
queue, and the bandwidth allocation per DSCP.
When the bandwidth-sharing keyword is used, the output of is a table displaying the bandwidth sharing
configuration per processing card slot/CP number.
For additional information on the NPU QoS functionality, refer to the System Administration and
Configuration Guide.
When the bandwidth keyword is used, the output is a table showing the configuration status, the priority
queue, and the bandwidth allocation per DSCP.
When the bandwidth-sharing keyword is used, the output of is a table displaying the bandwidth sharing
configuration per processing card slot/CP number.
For additional information on the NPU QoS functionality, refer to the System Administration and
Configuration Guide.
Important:
This functionality is not supported for use with the PDSN at this time.