Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Mode Show Commands (Q-S)
▀ show qos npu stats
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
show qos npu stats
Displays NPU Qos statistics per priority queue for a particular processing card:
Product
GGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Specifies the chassis slot number in which the processing card for which to display statistics is installed.
is an integer from 1 to 48 that represents the slot in which a processing card is installed.
Processing cards can be installed in slots 1 through 8, and/or 10 through 16.
Usage
This command displays packet and byte counts per NPU QoS priority queue on a per-processing card basis.
For additional information on the NPU QoS functionality, refer to the System Administration and
Configuration Guide.
For additional information on the NPU QoS functionality, refer to the System Administration and
Configuration Guide.
Important:
This functionality is not supported for use with the PDSN at this time.
Example
The following command displays NPU QoS priority queue statistics for a processing card installed in chassis slot
number 4:
The following command displays NPU QoS priority queue statistics for a processing card installed in chassis slot
number 4:
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.