Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Global Configuration Mode Commands
▀ threshold poll diameter-retry-rate
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold poll diameter-retry-rate
This command configures the polling interval for Diameter Retry Rate threshold.
Product
ECS
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: 300 seconds
Default: 300 seconds
Specifies the polling interval for Diameter Retry Rate threshold, in seconds.
must be an integer from 60 through 60000. The input will be rounded up to the closest multiple
of 30.
Usage
This command specifies the polling interval for Diameter Retry Rate threshold.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a polling
interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
and other threshold commands in this chapter for additional
information on the system‘s support for thresholding.
Example
The following command configures the Diameter Retry Rate threshold polling interval to 600 seconds:
The following command configures the Diameter Retry Rate threshold polling interval to 600 seconds: