Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Network Service Entity- IP Local Configuration Mode Commands
▀ nsvc-failure-action
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
nsvc-failure-action
This command enables and disables the sending of an NS-STATUS message with cause ‗ip-test fail‘ when NSVC goes
down.
down.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Resets the command configuration to its default value. The default action is not to send an NS-STATUS
message. This is applicable only to NSVCs that are auto-learned and not configured.
message. This is applicable only to NSVCs that are auto-learned and not configured.
Enables the sending of the NS-STATUS message.
Usage
Use this command to enable or disable sending an NS-STATUS messages when an NSVC goes down.
Example
Enable sending of the message:
Enable sending of the message: