Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
SGSN Operator Policy Configuration Mode Commands
▀ nri
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
nri
This command specifies the network resource identifier (NRI) stored in bit 17 to bit 23 of Packet-temporary mobile
subscriber identity (P-TMSI) to be retrieved by SGSN operator policy.
subscriber identity (P-TMSI) to be retrieved by SGSN operator policy.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the configured NRI value and location in P-TMSI for retrieval by this SGSN operator policy.
Specifies the length of bits to be used in the P-TMSI to retrieve NRI information. This starts from bit 23 of
the P-TMSI.
the P-TMSI.
must be an integer from 1 to 6.
Specifies the value of the NRI to be retrieved from the P-TMSI. This value should not exceed the maximum
possible value for the specified length.
possible value for the specified length.
must be an integer from 0 to 63.
Usage
Use this command to retrieve the NRI stored in in bit 17 to bit 23 of the packet-temporary mobile subscriber
identity (P-TMSI) .
identity (P-TMSI) .
Example
The following command specifies the length of NRI information to 5 bit and length of the NRI information to 23:
The following command specifies the length of NRI information to 5 bit and length of the NRI information to 23: