Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
SGSN Operator Policy Configuration Mode Commands
▀ pdp-activate access-type
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
pdp-activate access-type
This command configures the PDP context activation option based on operator‘s policy for type of access technology.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Resets the configuration to system default values for PDP context activation request.
Specifies the access technology type for PDP context activation.
: Enables access type as GPRS.
: Enables access type as UMTS.
Default: allow
Configures the system to allow to create all PDP context activation request from MS.
Configures the system to allow to create all PDP context activation request from MS.
Specifies the location area instance to create PDP context.
must be an integer from 1 through 5. The value must be an already defined instance of a LAC list
created with the
command.
Default: 8
Specifies the failure code for PDP context activation.
Specifies the failure code for PDP context activation.
must be an integer from 8 through 112.
Usage
Use this command to configure this policy to allow GPRS/UMTS access through PDP context activation
request from MS.
request from MS.
Example