Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi

Pagina di 338
  Service Configuration Procedures 
Session Continuity Support  ▀   
Cisco ASR 5000 Series Access Service Network Gateway Administration Guide  ▄  
 
  OL-22953-01 
 
3GPP2 FA Service Configuration 
 
 
The FA must not be configured to remove the MN-FAC and MN-AAA extensions from RRQs, and the 
 command MUST NOT be enabled 
 
Revocation must be enabled. 
These instructions assume that you are at the root prompt for the Exec mode: 
 
Step 1 
Enter the configuration mode by entering: 
 
The following prompt appears: 
 
Step 2 
Enter context configuration mode by entering: 
 
context_name is the name of the system context designated for HA service configuration. The name must be from 1 to 
63 alpha and/or numeric characters and is case sensitive. 
The following prompt appears: 
 
Step 3 
Create the FA service for 3GPP2 by entering the following command: 
 
fa_service_name is the name designated for the FA service for 3GPP2 service. The name must be from 1 to 63 alpha 
and/or numeric characters and is case sensitive. 
The following prompt appears: 
 
Step 4 
To disable the removal of the MN-FAC and MN-AAA extensions from RRQs at FA service, enter: