Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Service Configuration Procedures
Session Continuity Support ▀
Cisco ASR 5000 Series Access Service Network Gateway Administration Guide ▄
OL-22953-01
3GPP2 FA Service Configuration
The FA must not be configured to remove the MN-FAC and MN-AAA extensions from RRQs, and the
command MUST NOT be enabled
Revocation must be enabled.
These instructions assume that you are at the root prompt for the Exec mode:
Step 1
Enter the configuration mode by entering:
The following prompt appears:
Step 2
Enter context configuration mode by entering:
context_name is the name of the system context designated for HA service configuration. The name must be from 1 to
63 alpha and/or numeric characters and is case sensitive.
63 alpha and/or numeric characters and is case sensitive.
The following prompt appears:
Step 3
Create the FA service for 3GPP2 by entering the following command:
fa_service_name is the name designated for the FA service for 3GPP2 service. The name must be from 1 to 63 alpha
and/or numeric characters and is case sensitive.
and/or numeric characters and is case sensitive.
The following prompt appears:
Step 4
To disable the removal of the MN-FAC and MN-AAA extensions from RRQs at FA service, enter: