Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Cisco ASR 5000 Series Gateway GPRS Support Node Administration Guide ▄
OL-22943-01
Chapter 6
GGSN Service Configuration Procedures
This chapter is meant to be used in conjunction with the previous chapter that describes the information needed to
configure the system to support GGSN functionality for use in GPRS/UMTS networks.
configure the system to support GGSN functionality for use in GPRS/UMTS networks.
It is recommended that you identify the options from the previous chapters that are required for your specific
deployment. You can then use the procedures in this chapter to configure those options.
deployment. You can then use the procedures in this chapter to configure those options.
Procedures are provided for the following tasks:
I
MPORTANT
:
At least one Packet Accelerator Card (PAC) or Packet Services Card (PSC) must be made active
prior to service configuration. Information and instructions for configuring PACs/PSCs to be active can be found in the
Configuring System Settings chapter of the System Administration Guide.
Configuring System Settings chapter of the System Administration Guide.
C
AUTION
:
While configuring any base-service or enhanced feature, it is highly recommended to take care of
conflicting or blocked IP addresses and port numbers for binding or assigning. In association with some service steering
or access control features, like Access Control List configuration, use of inappropriate port number may result in
communication loss. Refer respective feature configuration document carefully before assigning any port number or IP
address for communication with internal or external network.
or access control features, like Access Control List configuration, use of inappropriate port number may result in
communication loss. Refer respective feature configuration document carefully before assigning any port number or IP
address for communication with internal or external network.