Cisco Cisco Packet Data Interworking Function (PDIF) Guida Alla Risoluzione Dei Problemi
Troubleshooting the System
Using the System Diagnostic Utilities ▀
Cisco ASR 5000 Series System Administration Guide ▄
OL-22969-02
Step 4
Configure the amount of information that is displayed by the monitor. To enable or disable options, enter the letter
associated with that option (C, D, E, etc.). To increase or decrease the verbosity, use the plus ( + ) or minus ( - ) keys.
associated with that option (C, D, E, etc.). To increase or decrease the verbosity, use the plus ( + ) or minus ( - ) keys.
The current state, ON (enabled) or OFF (disabled), is shown to the right of each option.
Important:
Option for performing multi-call traces is only supported for use with the GGSN.
Step 5
Repeat step 6 as needed to enable or disable multiple protocols.
Step 6
Press the Enter key to refresh the screen and begin monitoring.
The following displays a portion of a sample of the monitor‘s output for a subscriber named user2@aaa. The
default protocols were monitored.
default protocols were monitored.