Cisco Cisco AP541N Wireless Access Point Manuale Di Manutenzione
SNMP
Configuring SNMP on the Access Point
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
114
5
NOTE
After you configure the SNMPv3 Users settings, you must click Apply to apply the
changes and to save the settings.
changes and to save the settings.
Authentication Type
Select the type of authentication to use on SNMP
requests from the user:
requests from the user:
MD5—Require MD5 authentication on SNMPv3
requests from the user.
requests from the user.
None—SNMPv3 requests from this user require no
authentication.
authentication.
Authentication Key
If you specify MD5 as the authentication type, enter a
password to enable the SNMP agent to authenticate
requests sent by the user.
password to enable the SNMP agent to authenticate
requests sent by the user.
The passphrase must be between 8 and 32
characters in length.
characters in length.
Encryption Type
Select the type of privacy to use on SNMP requests
from the user:
from the user:
DES—Use DES encryption on SNMPv3 requests from
the user.
the user.
None—SNMPv3 requests from this user require no
privacy.
privacy.
Encryption Key
If you specify DES as the privacy type, enter a key to
use to encrypt the SNMP requests.
use to encrypt the SNMP requests.
The passphrase must be between 8 and 32
characters in length.
characters in length.
SNMPv3 Users
This field shows the users that you have defined on
the access point. To remove a user, select the user and
click Remove.
the access point. To remove a user, select the user and
click Remove.
Table 28 SNMP v3 Users (Continued)
Field
Description