Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

Configuring SNMP on the Access Point

Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide

114

 

After you configure the SNMPv3 Users settings, you must click Apply to apply the 
changes and to save the settings.

Select the type of authentication to use on SNMP 
requests from the user:

MD5—Require MD5 authentication on SNMPv3 
requests from the user.

None—SNMPv3 requests from this user require no 
authentication.

If you specify MD5 as the authentication type, enter a 
password to enable the SNMP agent to authenticate 
requests sent by the user.

The passphrase must be between 8 and 32 
characters in length.

Select the type of privacy to use on SNMP requests 
from the user:

DES—Use DES encryption on SNMPv3 requests from 
the user.

None—SNMPv3 requests from this user require no 
privacy.

If you specify DES as the privacy type, enter a key to 
use to encrypt the SNMP requests.

The passphrase must be between 8 and 32 
characters in length.

This field shows the users that you have defined on 
the access point. To remove a user, select the user and 
click Remove.