Cisco Cisco Packet Data Gateway (PDG)
ATM Port Configuration Mode Commands
The Asynchronous Transfer Mode (ATM) port configuration mode provides the commands to create,
configure, bind, and manage the ATM ports on line cards that support ATM, such as the ATM/POS OC-3
single-mode and multi-mode optical line cards.
configure, bind, and manage the ATM ports on line cards that support ATM, such as the ATM/POS OC-3
single-mode and multi-mode optical line cards.
Before using these commands, card framing should be configured for either SDH or SONET with the
framing command described in the Card Configuration Mode chapter.
framing command described in the Card Configuration Mode chapter.
Important
Command Modes
Exec > Global Configuration > ATM Port Configuration
configure > port atm slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
)#
The commands or keywords/variables that are available are dependent on platform type, product version,
and installed license(s).
and installed license(s).
Important
•
•
•
•
•
•
•
•
•
•
Command Line Interface Reference, Modes A - B, StarOS Release 19
1785