Cisco Cisco ASR 5000
APN Profile Configuration Mode
▀ ip address pool
▄ Command Line Interface Reference, StarOS Release 18
1524
ip address pool
Configure the name of the IP address pool from which the IP address needs to be allocated to the user equipment (UE).
Product
SaMOG
Privilege
Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
[ no ] ip address pool name pool_name
no
If previously configured, removes the IP address pool to be used for web authorization.
pool_name
pool_name
must be an alphanumeric string of 1 to 31 characters.
Usage
Use this command to configure the name of the IP address pool from which the IP address is to be allocated
to the UE. during the pre-authentication phase. The IP address pool name specified in this configuration will
be used only if the AAA server does not specify the same during the pre-authentication phase.
to the UE. during the pre-authentication phase. The IP address pool name specified in this configuration will
be used only if the AAA server does not specify the same during the pre-authentication phase.
Important:
This command is license dependent. Contact your Cisco account representative for more information
on SaMOG feature license requirements.
Example
The following command configures an IP address pool name of
wapool
:
ip address pool name wapool