Cisco Cisco Aironet 350 Wireless LAN Client Adapter

Release Notes for Cisco Aironet Client Utilities 2.22 and Driver 2.30 for Windows CE 2.11

OL-5202-01

Upgrading to a New Client Utility and Driver Release

Step 5

Click Option #2: Aironet Wireless Software Display Tables.

Note

You can download software from the Software Selector tool instead of the display tables. To do
so, click Option #1: Aironet Wireless Software Selector, follow the instructions on the screen,
and go to

Step 10

Step 6

Click Cisco Aironet Wireless LAN Client Adapters.

Step 7

Find the section for Windows CE client adapter drivers and utilities.

Step 8

Click the link for Windows CE 2.11.

Step 9

Click the WinCE211-PCMCIA-LMC-v223.exe file.

Step 10

Read and accept the terms and conditions of the Software License Agreement.

Step 11

Click the WinCE211-PCMCIA-LMC-v223.exe file to download it.

Step 12

Save the file to the hard drive of your laptop or PC.

Step 13

Use Windows Explorer to locate the saved file.

Step 14

Double-click the WinCE211-PCMCIA-LMC-v223.exe file. The application creates an Install directory
under the ActiveSync directory, extracts the .cab files contained in the *.exe file, and copies them to the
Install directory.

Step 15

Click Next to start the Windows CE Application Manager (CeAppMgr). CeAppMgr interrogates the
Windows CE device to determine its processor type.

Note

If a Windows CE device is not connected to the laptop or PC (as instructed in

Step 2

), click Exit

to quit the setup program and connect a Windows CE device or click Next to continue the
installation. If you choose Exit, click OK to shut down CeAppMgr and start again beginning
with

Step 1

. If you choose Next, a message appears indicating that the software will be

downloaded the next time a mobile device is connected. Click OK. The next time a Windows
CE device is connected to the laptop or PC through ActiveSync, CeAppMgr starts automatically,
and you are prompted to install the software.

Step 16

When a dialog box appears asking if you want to install the client adapter using the default application
installation directory, click Yes. The default directory is \Windows\Programs\Cisco.

A message and a progress bar appear indicating that the client adapter is being installed. The driver and
help files are copied to the \Windows directory, and the client utilities are installed in the
\Windows\Programs\Cisco directory. Shortcuts to ACU and CEM are automatically added to the
desktop.

Step 17

When the installation process is complete on the laptop or PC, a message appears asking you to check
the screen of the Windows CE device to see if any additional steps are required to complete the
installation. Click OK to terminate the installation process on the laptop or PC.

Step 18

Complete any required steps on the Windows CE device.

Step 19

Disconnect the Windows CE device.

Step 20

Insert the client adapter into the PC card slot of the Windows CE device.

The Windows CE device should configure the client adapter, and the green LED on the adapter should
blink. If this does not happen, remove the client adapter, reset the Windows CE device, and reinsert the
client adapter.